Important Tips

3 Types of Dock Lines for Kayak Docks

Types of Dock Lines for Kayak Docks. You go out on your boat dock to find out that your beloved boat has drifted away. If it has gone too far, finding it will be impossible. If you manage to find it, consider yourself lucky then! However, there is always the risk that your boat will continue to float away from the dock if you have not bought a premium dock line.

Dock lines for kayak docks ensure that your watercraft stays in one place, which is close to your boat dock. Your boat line will also come in handy when you are away from your own dock and you need to tie it to another dock.

You can get either a transient dock line or a permanent dock line.

  • Transient Dock Lines are nylon lines with spliced eyes. Pass the eye in the end around a cleat or pile it on the boat dock and adjust the bitter end on board.
  • Permanent Dock Lines are nylon lines. To protect them from chafe, add a rubber, fabric, or leather chafe gear at the location the line goes through the chocks. Next, place a chafe sleeve on the eye, which is the end you put around the cleat on the boat dock.

Once you have decided on the type of dock line, you need to choose between the three different weave types. These are — three-strand, braided nylon, and double-braided nylon.

Weave Types: Three-strand, Braided Nylon, and Double-Braided Nylon

First, buy a dock line made from nylon not polypropylene. Polypropylene does not stretch enough, degrades fast in the sun, and has a low breaking strength.

From nylon dock lines, you can choose from the following three weave types:

  • Three-strand is abrasion resistant, easier to splice, affordable, and stretches.
  • Braided Nylon is easier on the hands, looks better, and is stronger.
  • Double Braided Nylon is stronger, easy to handle, looks better, and is abrasion resistant with controlled elongation.

After you select the type of dock line you want, you need to choose the right size, length, and quantity.

Choosing the Size, Length, and Quantity

Dock lines should have 1/8 inch of diameter for every 9 inch of the watercraft with a minimum size of 3/8 inch. Having a 20-inch bat, use a 3/8-inch dock line. If you have a 40-inch boat, use a 5/8-inch dock line. You can go for a bigger boat line because it is easier to hand and grip than a smaller boat line.

If you are using a transient dock line, ensure the length is around 2/3 of the length of your boat if you are using it on its bow or stern. If you are using a spring line, its length should be the same length as your boat. You need to have one stern line, one bow line, and two spring lines at a minimum.

When you are shopping for a dock line, keep these tips in mind to choose the best one for your watercraft. If you reside in Texas, Oklahoma, or New Mexico, call EZ Dock Texas at 800-654-8168. We can give you a quote, install a boat dock, and provide you with advice.

Leave a Reply